[Company Logo Image]  
Compuplast North America
 eDesignBC
 Home Up Contents Search HQ Site

Moldex3D eDesign Boot Camp
Date: Oct. 24, 2008
Time: 8:00 am to 5:00 pm
Location: Troy (Detroit), MI USA

Overview

Who Should Attend

Location:

Cost:

Registration:

   

Overview
Compuplast Canada Inc. and Introtech USA Inc. are offering a special one-day hands on, "Boot Camp" on Advanced Injection Molding Simulation during which we will demonstrate the latest technology and show how easy it is to remove much of the "guess work" from Injection Molding part and tool designs.

Moldex3D eDesign is a very powerful and efficient injection molding simulation tool that can perform a fully 3D analysis of complex parts relatively quickly and easily. The Moldex3D/eDesign suite of software helps you to quickly check the manufacturability of injection molded plastic part design. With intelligent eDesign meshing engine and best-in-class 3D technology, users can work directly through solid CAD models to true 3D simulations more quickly and efficiently than ever before. The easy-to-use user interface minimizes the efforts in training and learning. The interactive results display helps users to quickly check and optimize designs.

What will you learn

bullet

The tools and steps required to perform an injection molding simulation on a mold or molded part;

bullet

Differences between "Shell", "2.5D", "Mid-Plane" and true "Solid 3D" simulations;

bullet

The different types of "meshing" techniques, and their effect on results or accuracy of the simulation;

bullet

Post-processing and interpretation of simulation results;

The first Moldex3D “eDesign Boot Camp” has been developed to help “kick start” attendees with the ability to perform a basic simulation of the injection molding process. Participants will then be offered a special 1-month trial license of the eDesign software so that they can immediately apply what they learned back at their jobs.

Key Benefits:
Shorter mold design time, Less (re)machining time, Less polymer scrap, Less scrap metal plates, Faster cycletimes, Impoved part quality!

Download Brochure in PDF format   (320 KB)

 

  

 

 

 

 

 

 

 

 

 

 


Who should attend

This seminar is intended for anyone involved in the development and manufacturing of injection molded parts who also wishes to improve the efficiency of their development program and maximize their part quality.  Those considering to bring simulation technology “in house” will also benefit from the information provided in this seminar.

Cost
The cost for this 1-day training session is only US$300 per person. This fee includes all training material, computer rental and meals for the day. Participants will also be entitled to purchase a special, 1-month trial license of the Moldex3D eDesign software for the super discounted rate of US$500.

 Tentative Program

1.                              8:00 – 8:30 AM

    1. Registration

    2. Breakfast

2.                              8:30 – 9:00 AM                 

    1. Introduction to Coretech/Compuplast/Introtech 

    2. Seminar/Training Intent           

3.                              9:00 – 10:00 AM             

    1. What is Moldex3D?               

    2. Description of various modules      

    3. eDesign overview                        

4.                              10:00 – 10:15 AM – Break

5.               10:15 AM – 12:15 PM            

  1. Step by step procedure for pre-processing in eDesign using a sample part

  2. Submit analysis

  3. Make presentation         

  4. Post processing/results review

  5. Re-submit with finer mesh – solving during lunch

6.      12:15 – 1:00 PM – Lunch

7.                              1:00 – 1:30 PM           

    1. Review results of analysis with finer mesh

8.                              1:30 – 2:45 PM                                      

    1. Set up and review analysis results for sample part # 2

                                                               i.      Present other features while analysis is running

    1. Set up and review analysis results for sample part # 3      

9.                              2:45 – 3:00 PM - Break

10.             3:00 – 4:00 PM         

  1. Case study on drain screen – review              

  2. Case study on fascia bracket – review                      

11.                        4:00 – 4:30 PM             

    1. Discussions on other modules provided by Moldex3D

    2. Overview on other plastics process simulation software

    3. Closing remarks
Location:

Introtech, Inc. World Headquarters

1737, Thunderbird Drive
Troy, Michigan USA 48084
Tel: (248) 269-8911
Fax: (248) 269-8915

 

Registration

To register for this event, please fill in and submit the following form. You will be contacted within 1 business day to confirm your spot.  Space is limited so register early.

Registration Form

 First Name:
Last Name: 
Position/Title:     
Company:   
Street Address:
City:      State/Prov:    
Postal Code: 
Country: 

Telephone:    Fax: 

e-mail: 

Please enter your particular injection molding area of interest.

If you have any questions please contact us by telephone or e-mail.

Tel: 905 814 8923 or 248 269-8911

e-mail: seminar@compuplast.ca

 

 

[ Home ] [ Up ]

Send mail to webmaster@compuplast.ca with questions or comments about this web site.
Last modified: July 05, 2008